Products
Contact Us
- Contact Person : Mr. li sun
- Company Name : Yantai Jinpeng Mining Machinery Co.,Ltd
- Tel : 0086-0535-3020703
- Fax : 0086-0535-2030703
- Address : shandong,yantai,No. 11, Fuzhou Road, Yantai Development Zone, Shandong
- Country/Region : China
- Zip : 264006
Swaying Feeder
Product Detailed
Related Categories:Agricultural Product Stock
400×400 Swaying Feeder
Operation Instruction
One. Equipment main application
400×400swaying feeder is used for the mine for gold, metallurgical and mining, chemical and cement industries, it's generally in the preceding paragraph before grinding, it can make the material more evenly to give into grinding equipment.
Two. Specifications and performance (see table below)
Inlet mouth (L×W) (mm)
400×400
Eccentric journey (mm)
0~170
Swing numbers (nth/min)
47
Feeding particle max. (mm)
35
Capacity (t/h)
12
Motor
Model
Y90S-4
Power
1.1kw
Rotation speed
1400r/min
Three.Equipment working principle and structure
1.body 2.connecting rod 3.gear reducer, 4.flexible coupling, 5.the motor
Swaying feeder consists of the following main components: the motor, flexible coupling, gear reducer, body and connecting rod.
The device is generally installed in the hopper lower part of the discharge, the materials landed in the body. While working, the motor drives reducer through coupling, and through eccentric disk so that the equipment be placed back and forth movement, which is expected to complete the regulated feed. By adjusting the eccentric plate on the scale, the charge is adjustable.
Four. Equipment operating instruction
1, double-check equipment and hopper bolts fastening the mouth if there is loose.
2, check whether the ministries lubrication point is full of lubricating oil.
① rolling bearing grease filling capacity of the cavity 2 / 3.
②reducer injects within 30 # engine oil, the oil reaches worm gear tooth surface high degree of 1.5 times.
3, adjust the distance between flashboard to swing according to the feeding particle requirements.
4, when equipment is starting, the body does not allow too much of the material, it should be the normal operation of equipment before it can start feeding.
5, the first stop should be to stop feeding, the electrical motor can be closure after all the materials are discharged.
Five. Product package and delivery
If the users have no special requirements, such as transport packaging plant makes into a natural state then shipped whole, other non-Annex.
Other products